3. EXCHANGE OF SOCKET PART
Remove two Screws located at the inner side of Socket cover.
Next, remove the Screws that are fixing the wires at the back side. Then, exchange Socket.
SCREW 3,5X18
TX10
If you remove the two Screws (located at the inner side of Socket)
before removing the Socket Cover, the PLUG SOCKET FIXING
PLATE (at the back side) will come off as shown in the picture
below. This will make it hard to assemble. So it's recommended
to do disassembling while the Cover is removed.
SOCKET
PLUG SOCKET
FIXING PLATE
INTERFACE
5