Makita VC2211M Instruction Manual
Hide thumbs
Also See for VC2211M:
- Instruction manual (84 pages) ,
- Technical information (21 pages) ,
- Instruction manual (81 pages)
Related Manuals for Makita VC2211M
Summary of Contents for Makita VC2211M
- Page 1 INSTRUCTION MANUAL Vacuum Cleaner VC2211M VC3211M 015656 IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model VC2211M / VC3211M Countries Switzerland Voltage Volt 230 - 240 230 - 240 230 - 240 Power consumption Watt 1050 1050 1050 1050 Watt at symbol mode 2400 1100 1900 Connected load for appliance socket... - Page 3 SERIOUS INJURY to the EC Declaration of Conformity operator as well as damage to the cleaner. If in Makita declares that the following Machine(s): doubt, DO NOT PLUG IN THE CLEANER. Using a Designation of Machine:...
-
Page 4: Functional Description
23. CHECK DAMAGED PARTS. Before further use of the manual may cause serious personal injury. cleaner, a guard or other part that is damaged FUNCTIONAL DESCRIPTION should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of WARNING: moving parts, breakage of parts, mounting, and any... -
Page 5: Connecting Electric Power Tools
When the tank is filled with liquid, the cleaner emits long 1. Hose band warning beep. When the tank is full and the beep sounds, switch off the cleaner and empty the tank. Connecting electric power tools WARNING: 013479 Make sure that both the cleaner and the electric •... - Page 6 Locking or unlocking the caster Storing the power supply cord 1. Base hook 1. FREE position 2. Power supply 2. LOCK position cord 3. Stopper lever 4. Caster 013461 013482 NOTICE: To lock the caster with a stopper, lower the stopper lever Do not use the cleaner or a connected electric and the caster no longer will rotate.
- Page 7 Spread the bag around the top of the tank. 1. Filter bag Hook up the other side of the bag around the top of the tank so that the prefilter hook can catch and hold it securely. NOTE: A polyethylene bag available on the market can be •...
-
Page 8: Operation
013483 013379 Take the polyethylene bag out of the tank. Insert the hose onto the mounting port of the tank and turn it clockwise until it locks. NOTE: OPERATION Take the polyethylene bag carefully out of the tank • so that the polyethylene bag cannot be caught and torn by the protrusion inside the tank when WARNING: emptying it. -
Page 9: Removing The Air Filter
Removing the air filter Assembling the air filter When you get the air filter components separately, CAUTION: assemble them as follows. Wait for about 5 minutes so that dust in the tank • completely settles down. 1. Powder filter 2. Damper Make sure that the tool is unplugged. -
Page 10: Cleaning The Air Filters
Storage of power supply cord 1. Power supply cord 2. Multi-hook 014948 NOTICE: 013380 Make sure the hooks on the filters are set at the • correct position. 1. Power supply cord Cleaning the level sensors 2. Base hook 1. Level sensors 011634 Wind up the power supply cord around the multi-hook or the base hook. -
Page 11: Optional Accessories
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Hose • Front cuffs (22, 24, 38) • Straight pipe •... - Page 12 Makita Jan-Baptist Vinkstraat 2, 3070, Belgium Makita Corporation Anjo, Aichi, Japan www.makita.com 885182-893...