Cisco RP Series Installation Manual page 78

Configure Fabric Interconnect B for UCS Mini
yes
Enter the switch fabric (A/B) []: A
Enter the system name: Fabric
Physical Switch Mgmt0 IPv4 address : 192.168.65.x
Physical Switch Mgmt0 IPv4 netmask : 255.255.255.0
IPv4 address of the default gateway : 192.168.65.1
Cluster IPv4 address : 192.168.65.x
Configure the DNS Server IPv4 address? (yes/no) [n]: n
Configure the default domain name? (yes/no) [n]: n
Join centralized management environment (UCS Central)? (yes/no) [n]: n
Apply and save the configuration (select 'no' if you want to re-enter)? (yes/no):Yes
Verify the system configuration before accepting the settings
Apply and save the configuration (select 'no' if you want to re-enter)? (yes/no): yes
Configure Fabric Interconnect B for UCS Mini
Before you begin
This procedure applies to the UCS Mini chassis. It does not apply to the Cisco UCS 5108 Blade Server chassis.
Procedure
Set the following initial settings:
Example:
Enter the configuration method. (console/gui) ? console
Installer has detected the presence of a peer Fabric interconnect. This Fabric interconnect
will be added
to the cluster. Continue (y/n) ? y
Enter the admin password of the peer Fabric interconnect:
Connecting to peer Fabric interconnect... done
Retrieving config from peer Fabric interconnect... done
Peer Fabric interconnect Mgmt0 IPv4 Address: 192.168.65.x
Peer Fabric interconnect Mgmt0 IPv4 Netmask: 255.255.255.0
Cluster IPv4 address:192.168.65.1
Peer FI is IPv4 Cluster enabled. Please Provide Local Fabric Interconnect Mgmt0 IPv4
Address
Physical Switch Mgmt0 IP address : 192.168.65.x
Apply and save the configuration (select 'no' if you want to re-enter)? (yes/no): yes
Applying configuration. Please wait
Cisco R42612 Rack and RP-Series Metered Input PDU Installation Guide
76
Integrating UCS Components in the Dynamic Rack