Unpacking the Rack
Figure 8: Removing the Brackets
Step 5
(Optional) To reduce the weight of the rack for easier handling, remove the side panels (if Included). See
Removing and Installing Side Panels, on page
Step 6
(Optional) To reduce the weight of the rack for easier handling, remove the front door. See
Installing the Front Door, on page
Step 7
(Optional) To reduce the weight of the rack for easier handling, remove the rear doors. See
Installing Rear Doors, on page
Step 8
For racks with equipment that is already installed, use the four bolts from the front of the rack that were set
aside in Step 4 to secure the two ramps to the pallet at the rear of the rack. Predrilled holes are hardware are
provided there. See the following figure.
43.
44.
46.
Cisco R42612 Rack and RP-Series Metered Input PDU Installation Guide
Removing the Cisco Cisco R42612 Rack from the Pallet
Removing and
Removing and
23