Acquisition Unit; Display Unit; Strobex; Acquisition Unit Inspection - Honeywell VXP System Maintenance Manual

Maintenance

4.2.1.1 Acquisition Unit

The Acquisition Unit should be inspected per Table 4-2.
Inspection
Inspect housing for loose screws.
Inspect the connectors for heavy wear or
corrosion.

4.2.1.2 Display Unit

The Display Unit should be inspected per Table 4-3.
Inspection
Inspect housing for loose screws.
Inspect the connectors for heavy wear or
corrosion.

4.2.1.3 Strobex

The Strobex should be inspected per Table 4-4.
Inspection
Inspect plastic light shield for cracks,
scratches or discoloration.
Inspect flash tube for damage or discoloration. Return to Chadwick-Helmuth for repair.
Inspect reflector for scratches and cleanliness.
Inspect trigger switch handle for condition
and proper operation.
CAUTION: If the Strobex is accidentally dropped or damaged, inspect in accordance
with Table 4-4.
4-2 Honeywell
Table 4-2. Acquisition Unit Inspection
Remedy
Tighten loose screws.
Return the unit to Chadwick-Helmuth for
repair.
Table 4-3. Display Unit Inspection
Remedy
Tighten loose screws.
Return the unit to Chadwick-Helmuth for
repair.
Table 4-4. Strobex Inspection
Remedy
Return to Chadwick-Helmuth for repair.
Clean if dirty. If scratched, return to
Chadwick-Helmuth for repair.
Return to Chadwick-Helmuth for repair.