Honeywell VXP System Maintenance Manual page 18

Introduction
Part No. Nomenclature
13955 Accelerometer (ICP)
610-199 Printer paper
610-527 Carrying case
3300, 10444, Reflective tape,
12803, 4270A patches and target
sets
Part No. Nomenclature
10185 Cable, Photocell
10808 Cable, Magnetic
Pickup
10813 Cable, Power Supply
11210 Cable, Velocimeter
13279 Cable, FasTrak
15371 Cable, VXP AU to
or DU
17317
15384 Cable, ICP
Accelerometer
In addition, various brackets, manuals, mounting assemblies and charts may be supplied with this
kit. The only other items that must be obtained are the Chadwick-Helmuth Model 11A Calibrator
and an independent 24-32 Vdc power supply for testing and calibration.
1-8 Honeywell
Table 1-1. VXP Major Components
Purpose
Converts acceleration into an
analog voltage signal.
Spare paper rolls for thermal
printer.
Allows for all-in-one portability.
Protects when not in use.
Used when operating the Strobex
and FasTrak.
Table 1-2. VXP System Cables
Purpose
Connects Photocell to AU.
Connects magnetic pickup to
AU.
Connects the AU to the aircraft
power supply.
Connects Velocimeter to AU.
Connects the FasTrak to AU.
Connects signals between the
AU and the DU and the printer.
Connects ICP Accelerometer to
AU.
Quantity
AR
4
1
1
Quantity
AR
1
1
AR
1
1
AR