Table of Contents
Advertisement
Console Redirection Descriptions
BIOS Console
Redirection
Serial Port
Serial Port Mode
Flow Control
Redirection After
BIOS Post
Terminal Type
VT-UTF8 Combo
Key Support
http://www.motorola.com/computer/literature
This item allows serial console redirection to be enabled. This allows all
video output to be redirected through the serial port during the POST and
DOS. In addition, input through the serial port will be used through the
POST and DOS. The default setting is enabled.
Specifies the serial port to be used for console redirection.
Selects the baud rate for console redirection. The possible baud rates are
9600, 19200, 38400, 57600, and 115200.
This item allows flow control to be used to prevent data overruns. If the
cable supports hardware handshaking, then the hardware option should be
selected. Otherwise, software handshaking should be selected.
Control if console redirection is to be used after POST.
Selects between ANSI and VT100 terminal types.
Controls VT-UTF8 combination key support for ANSI and VT100
terminals.
Console Redirection Descriptions
3
3-19
Advertisement
Table of Contents
