Date / Time Descriptions; Bios Options Descriptions - Motorola CPIP5430 Installation And Use Manual

Single board computer and transition module
Table of Contents

Advertisement

Date / Time Descriptions

System Time
A new time is set by typing in the HOUR, MINUTE, and SECONDS each
followed by pressing < ENTER >. The time is displayed in 24 hour format;
therefore, AM hours range from 0 through 11 and the PM hours range from
12 through 23. Invalid times cannot be entered.
System Date
A new date is set by tying in the MONTH, DAY, and YEAR each followed
by pressing < ENTER >. If one of the parameters is out of range, the new date
will not be entered.

BIOS Options Descriptions

Quick
Summary Screen At Boot
Boot Failure Retry
AddOn ROM Display Mode
AddOn ROM Display Delay
Pause On Post Errors
Prompt During Post
http://www.motorola.com/computer/literature
Allows the BIOS to skip certain tests while booting. This
decreases the amount of time needed to boot the system.
When this option is enabled, the system summary information
will be displayed before the system boots.
Allows BIOS to automatically reattempt to boot if all detected
boot devices fail.
Selects the display mode used by the BIOS when signing on
option ROMs.
When this item is enabled, the BIOS will insert a brief pause
after each option ROM signs on. This is useful to allow viewing
any errors or messages that may otherwise be missed
This option determines whether the POST will pause and wait
for user input when an error occurs.
When this option is enabled, the prompt that displays the key
needed to enter SETUP will be displayed during the POST.
Date / Time Descriptions
3-9
3

Advertisement

Table of Contents
loading

Table of Contents