Table of Contents
Advertisement
BIOS
IDE Configuration Utility
3
IDE CONFIG
PRIMARY MASTER
PRIMARY SLAVE
SECONDARY MASTER
SECONDARY SLAVE
IDE Configuration Descriptions
IDE Configuration
Combined Mode
Option
Hard Disk Write
Protect
3-12
The following sections describe the configuration options for the IDE
controller.
IDE CONFIGURATION UTILITY
IDE Configuration
P-ATA Channel Selection
Hard Disk Write Protect
IDE Detect Time Out (Sec)
Onboard IDE Drive Pin Count 40
↑ ↓
Select Screen
F1
General Help
Motorola CPIP5430 BIOS v1.00 Beta-M
Selects the configuration for the onboard parallel and serial IDE controllers.
Selects which IDE connectors are active. When set to P-ATA Primary, the
on-board parallel drive is set as the primary master, and the serial ATA
connector on the Rear I/O board is set to secondary master. The parallel
ATA connector on the Rear I/O is disabled in this mode. When set to S-ATA
primary, the serial ATA connector on the Rear I/O is set to primary master,
and the parallel ATA connector on the Rear I/O is set to the secondary
master/slave. The onboard parallel drive is disabled in this mode.
When this item is enabled, the BIOS protects the IDE drives from write
accesses. This is only effective for operating systems that access the hard
drives using BIOS interfaces.
P-ATA only
Both
Disabled
35
↑ ↓/+-
Change Option
Esc
Exit
Computer Group Literature Center Web Site
Advertisement
Table of Contents
