Boot Menu - Motorola CPIP5430 Installation And Use Manual

Boot Menu

During POST display, the ESC key can be pressed to invoke the multi-boot
menu. The menu appears near the end of POST, before the system
summary screen is displayed, and after the option ROMs have signed on.
The multi-boot menu allows interactive selection of the boot device. The
list is typically in the following order:
Please select boot device:
USB 2.0 FLOPPY DRIVE
PM-WDC WD32BVA0
PS-CDU5211
IBA FE Slot 0328 v4110
↑ and ↓ to move selection
ENTER to select boot device
ESC to boot using defaults
The up and down arrows on the keyboard can be used to highlight the boot
device you want to use. Press Enter to boot from it. Hard drives are any
fixed disk (IDE, SCSI) in the system. Other devices may appear in the list,
such as Ethernet boot ROMs from either integrated networking
components or add-in cards. To change the boot order of devices within a
category (such as to boot from IDE hard drive instead of SCSI) or to
permanently change the boot order, you will have to enter SETUP and
change the boot options.
If any errors are detected up to this point they will be displayed on the
screen along with the following prompt to direct further actions. Pressing
F1 ignores the errors and continues with the boot process. The F2 or s key
can be pressed to enter the BIOS SETUP and possibly resolve any
configuration error that may have been made.
Press F2 or s to Run SETUP
Press F1 to load default values and continue
http://www.motorola.com/computer/literature
Boot Menu
3
3-3