Monitoring Screen - Honeywell Vertex M Manual

Vertex M 24-Point Continuous Monitor
TM
To Start or Stop an Analyzer from Monitoring
Stopping an analyzer from monitoring prevents the system from triggering false alarms during testing and
maintenance.
1. Choose Monitoring from the function buttons at the bottom of the screen.
2. Select the analyzer(s) from the keypad. The selected analyzer(s) will turn dark gray on the keypad.
3. Choose Stop or Start Monitor to change the state of the analyzer.
The status indicator changes to reflect the current status on the main screen, and on the analyzer button on
the keypad.
Stop/Start
Monitor
Section 4 - Operation
Point Status
4-27
Analyzer Keypad

Monitoring Screen