Event List - Honeywell Vertex M Manual

Vertex M 24-Point Continuous Monitor
TM

4.5.4 Event List

With the Event List, view and acknowledge active alarms and faults. Vertex M displays the newest event at the
top of the list. Scroll through the events with
the Back and More buttons. To select an event as the current event, touch the event. The current event will
have a green border.
Section 4 - Operation
Ack Current
Acknowledges an operator
has seen the current event
4-24
Reset Current
Clears the active
event from the list. If
the problem has not
been resolved, events
will continue to occur.
Reset All
Clears all events from
the list. Reset All is not
instantaneous. Vertex
M may not remove
events from the list for
several seconds.
Ack All
Acknowledges an
operator has seen all
of the events