Event And Alarm Types; Figure B-5 Combination Field Of View Example - Honeywell MAXPRO NVR Series Hardware Installation And Configuration Manual

A P P E N D I X B
B

Event and Alarm Types

Figure B-5
view.
Figure B-5
Event and Alarm Types
This section describes about the various default Event and Alarm types with severity level for
Camera, Recorder and SMART VMD.
Camera Level Events and Alarm types
The following table displays the 17 default camera level Events and Alarm types with
description and severity level.
The EventSeverity level above 50 is an alarm and below 50 is an event.
See the
Threshold value.
336
illustrates a typical region-of-interest box configuration in a combination field of
Combination Field of View Example
Setting the Alarm Threshold Value
EventID EventDescription
3 Camera User Recording Started
4 Camera User Recording Completed
5 Camera Disconnected
6 Camera Connected
7 Camera Continuous Recording Disabled
8 Camera Continuous Recording Enabled
9 Camera Event Recording Started
10 Camera Event Recording Completed
11 Camera Disabled
12 Camera Enabled
13 Camera User Recording Error
14 Camera NoMotion Detected
15 Camera Motion Detected
16 Camera Motion Started
17 Camera Motion Stopped
18 Camera Motion Stopped in all regions
section on page 96 to set the Alarm Severity
EventSeverity
20
20
40
40
20
20
30
30
20
20
30
40
40
40
30
10
MAXPRO NVR 5.0 Installation and Configuration Guide