Smart Alert; Alarm Event; Data Management - Honeywell FUSION III DVR User Manual

SMART Alert

Alarm Event

Data Management

________________________________________________________________________________________________________
Document 900.0803 Rev 8b
09/09
Set up the General and Users
1.
tabs first. (see above)
2. Select the Enable SMART Alarm.
3. Define the number hours
between SMART checks.
Select the type of SMART event
4.
to trigger an action.
5. Define the maximum HDD
temperature.
Select an action method.
6.
7. Click Apply.
1. Set up the General and Users
tabs first.
(see above)
2. Select the Use Email Alarm
check box.
Define the number of minutes
3.
between recording data checks.
4. Select Motion and/or Sensor to
send and alert on that type of
event.
5. Click Apply.
Click Close to return to the
6.
Administration tab.
Data Management is available for select
regions where operators must delete data
after a set number of days. If you need to
purge your video data and this feature is
not enabled on your Fusion contact
Technical Support.
Fusion III DVR User Guide
79