Table of Contents
Advertisement
SMART Alert
Alarm Event
Data Management
________________________________________________________________________________________________________
Document 800-05305 Rev A
11/09
1.
Set up the General and Users
tabs first. (see above)
Select the Enable SMART Alarm.
2.
Define the number hours
3.
between SMART checks.
4.
Select the type of SMART event
to trigger an action.
Define the maximum HDD
5.
temperature.
6.
Select an action method.
7.
Click Apply.
1.
Set up the General and Users
tabs first.
(see above)
Select the Use Email Alarm
2.
check box.
3.
Define the number of minutes
between recording data checks.
4.
Select Motion and/or Sensor to
send and alert on that type of
event.
Click Apply.
5.
6.
Click Close to return to the
Administration tab.
Data Management is available for select
regions where operators must delete data
after a set number of days. If you need to
purge your video data and this feature is
not enabled on your Fusion contact
Technical Support.
81
Advertisement
Table of Contents
