Table of Contents
Advertisement
Mounting
Bracket
Note
Diagram not to scale.
Mounting
Touchpoint 1 is supplied with a mounting bracket that fits onto a suitable wall. The controller is then
hooked onto the bracket. The previous diagrams show dimensions for Touchpoint 1 and the bracket.
Fit the bracket to a flat, firm surface, e.g. wall, suitable for the controller's size and weight.
Recommended screw for mounting is M3.5 x 25 (or #8 x 1").
1
Mark out and drill 4 x M3 holes for the mounting bracket fixing screws.
Use the mounting bracket as a template for the position of the holes.
2
Fix the bracket securely to the wall.
Use appropriate fixings for the surface to which the bracket/controller is mounted.
3
With the bracket secure, locate and then lower Touchpoint 1 onto it.
Ensure both top and bottom hooks on the back of the unit engage properly in the mounting
bracket slots.
TP1MAN Issue 3 Apr 06 (MAN0630)
Mounting Hole (6 off)
228.0 mm
(9.0")
240.0 mm
(9.5")
198.0 mm
(7.8")
Thickness - 5.25 mm (0.2") max.
78.0 mm
(3.0")
100.0 mm
(3.9")
Installation
12.0 mm
(0.5")
11
Advertisement
Table of Contents
