Phone Firmware And Upgrades; Postpone A Phone Upgrade - Cisco 8832 User Manual

Phone Firmware and Upgrades

Figure 11: Wireless Microphone Mounted on the Charging Cradle
When the conference phone is in a call, the expansion microphone LED around the Mute
green.
When the microphone is muted, the LED is lit red. When you press the Mute button, the phone and the
expansion microphones are muted.
If the phone is paired with a wireless microphone (for example, Wireless microphone 1) and you connect the
wireless microphone to a charger, pressing the Show detail softkey indicates the charge level for that
microphone.
When the phone is paired with a wireless microphone and you connect a wired microphone, the wireless
microphone gets unpaired and the phone is paired with the wired microphone. A notification appears on the
phone screen indicating that the wired microphone is connected.
Related Topics
Phone Firmware and Upgrades
Your phone comes with firmware already installed, which is specific to the call control system that your phone
uses.
Occasionally, your administrator upgrades the phone firmware for you. This upgrade happens in the background
even if you are using your phone.

Postpone a Phone Upgrade

When new firmware is available, the Ready to upgrade window is displayed on your phone and a timer
begins a 15-second countdown. If you do nothing, the upgrade proceeds.
You can postpone your firmware upgrade for 1 hour and up to 11 times. The upgrade is also postponed if you
make or receive a phone call.
Cisco IP Conference Phone 8832 User Guide
16
Install the Wireless Expansion
Pair a Wireless Microphone, on page 9
Unpair a Wireless Microphone, on page 9
Install the Wireless Microphone Charging
Charge a Wireless Microphone, on page 10
Microphones, on page 8
Cradle, on page 10
Your Phone
button is lit