Rear Panel - Cisco Firepower 4100 Series Hardware Installation Manual

Rear Panel

1
3
5
7

Rear Panel

The following figure shows the rear panel of the Firepower 4100.
Cisco Firepower 4110, 4120, 4140, and 4150 Hardware Installation Guide
8
Management
• Off—No connection or port is not in
use.
• Amber—No link or network failure.
• Green—Link up.
• Green, flashing—Network activity.
SSD
• Off— SSD not present.
• Green—SSD is present; no activity.
• Green, flashing—SSD is active.
• Amber—SSD failure.
• Amber, flashing—Rebuilding, flashes
at 1 Hz.
• Amber, flashing—Predictive failure
analysis (PFA) and hot spare; two fast
flashes at 4 Hz, pause for 0.5 seconds.
Active (ACT)
This LED is not supported; reserved for
future use.
Network activity
• Off—No connection or port is not in
use.
• Amber—No link or network failure.
• Green—Link up.
• Green, flashing—Network activity.
2 Health (SYS)
• Off—System is not booting yet.
• Green, flashing—Power-up
diagnostics are complete and system
is booting up.
• Green—The system has passed
power-up diagnostics.
• Amber—Power-up diagnostics has
failed.
• Amber, flashing—Alarm; power-up
diagnostics are running.
4 Power
• Off—Input power not detected.
• Green, flashing—Appears only when
you move the power switch from ON
to OFF. System is shutting down and
powers off once shutdown is
completed.
• Amber—System is powering up.
• Green—System fully powered up.
• Amber, flashing—Reserved.
6 Locator LED
• Off—Locate is off.
• Blue—Locate is on.
Overview