Cisco Firepower 4100 Series Hardware Installation Manual page 6

Features
Note The Firepower 4100 is certified for Common Criteria (CC) and Federal Information Processing Standards
(FIPS). See
for enabling these modes using the CLI. See
Chassis Manager Configuration Guide
Manager.
The following figure shows the Firepower 4100 series security appliance.
Figure 1: Firepower 4100 Series
See the Cisco Interactive Library
The following table lists the features for the Firepower 4100 series.
Table 1: Firepower 4100 Series Features
Feature
Form factor
Rack mount
Airflow
Processor
Memory
Maximum number
of interfaces
Management port
Cisco Firepower 4110, 4120, 4140, and 4150 Hardware Installation Guide
2
"Security Certifications Compliance" in the
for information for enabling these modes using the Firepower Chassis
for a video that displays the features and components of the Firepower 4100.
4110
1 RU
Fits a standard 19-in. (48.3cm) square-hole rack
Yes
Slide rails, mount ears, and screws included (4-post EIA-310-D rack)
Front to rear
Cold aisle to hot aisle
Single 12-core
64-GB DDR4
DRAM
24
With two 8-port network modules installed
One Gigabit Ethernet
Supports 1-G fiber or copper SFPs
Cisco FXOS CLI Configuration Guide
"Security Certifications Compliance" in the
4120 4140
Single 18-core
128-GB DDR4 256-GB DDR4
DRAM DRAM
Overview
for the procedure
Cisco FXOS Firepower
4150
Single 22-core
256-GB DDR4
DRAM