Playback; Playback Functions With The Remote Control - Sharp Viewcam VL-WD450U Operation Manual

Playback Functions with the
Remote Control
These playback functions can be operated
using the supplied remote control. (See pages
43 and 44 for use of the remote control.)
Frame Advance
The frame advance function allows you to play
back still images frame by frame.
1
During playback in TAPE-VCR ""us_'_,_
mode, press the PAUSE/STILL
button (11)to pause playback.
button
Advance/reverse
buttons
Reverse Playback
The reverse playback function allows you to
play backvideo in reverse.
During playback in TAPE-VCR <4. p,>
mode, press the 4111 b utton. _ Q
To return to normal playback, press the PLAY
button (_).
Slow
The slow function allows you to play back
images in slow motion.
During playback in TAPE-VCR ,)SLOW
mode, press the SLOW button ( i,- ).
2
Press the I1=,-(or <11) button. <'(" ">
• Each time you press the _\_ _
button, the picture advances
one frame forward (or
backward).
To return to normal playback, press the PLAY
button (_).
Notes:
• The sound is off during reverse, slow, and frame
advance playback.
• If you use the slow or frame advance function
with the tape recorded in LP mode, the picture
may advance several frames at a time.
• Clearer still images can be achieved by
recording with a fast shutter speed (see page
49).
To view slow playback in reverse, press the (111
button.
To return to normal playback, press the PLAY
button (_).
Note:
• To protect the tape, the camcorder automatically
returns to normal playback if it is left in Slow
mode for more than 10 minutes.
45