Card Playback - Sharp Viewcam VL-WD450U Operation Manual

Card Playback
It is possible to play back and view still images
recorded on a SmartMedia card on the LCD
monitor.
Media Selection switch
Power switch
Operation button
1 Open the LCD monitor and adjust the
angle.
2
Set the Media Selection
switch to CARD.
3
Hold down the Lock button and set the
Power switch to VCR.
• The images recorded on the
SmartMedia card are displayed in a
thumbnail format.
Total thumbnail pages
Lock button
/
NORMAL
Image number
Page number
4
Press _ or _,_ on the Operation button
to move the selection frame to the
desired image.
• Each time you press _ or =,_, the
selection frame moves backward or
forward.
Selection frame
1/2
NORMAL
100-0003
Notes:
• You can display a thumbnail of the previous
(or next) 6 images by pressing <_ (or _,_)
when the selection frame is on the image at
the top left (or bottom right).
• Holding down <,i or =,_ increases the
speed of motion of the selection frame.
5 Press
I,- / II.
• The selected image is displayed in full-
screen.
Available Operations during Full-
screen Display
•You can display the full-screen picture of the
previous or next image by pressing << or _.
• To return to a thumbnail of the images,
press m.
Note:
• Depending on the amount of data for the
recorded image, the resolution setting indicator
displayed during playback may not match the
resolution setting used during recording.
78