Setting The Digital Zoom - Sharp Viewcam VL-WD450U Operation Manual

Setting the Digital Zoom
You can select from among four different zoom
ranges: 1-26x (optical zoom), 26-50x (digital
zoom), 26-100x (digital zoom) or 26-780x
(digital zoom). The digital zoom allows you to
record powerful close-up pictures with the
same operation as normal zooming.
Notes:
• The digital zoom is in addition to the optical
zoom giving a combined maximum zoom range
of 1-780 x.
• As the image is enlarged digitally, the picture
quality decreases when higher digital zoom
settings are used.
1
Set the camcorder toTAPE-CAMERA or
CARD-CAMERA mode.
2
Press the MENU/DISPLAY button until
the menu screen appears.
4
5
Press • or _- / ii to select "50", "100" or
"780", then press _.
Press the MENU/DISPLAY button to
turn off the menu screen.
• The "D" digital zoom indicator is
displayed during digital zooming.
Digital zoom indicator
.... I-T _- Z00M
MENU/
_SPLAY
To use optical zoom only
Select "OFF" in step 4 above.
3 Select I_, then press _ on the
Operation button. Select "DGTL ZOOM"
(_), then press _ (_).
32