Recording With The Self-Timer - Sharp Viewcam VL-WD450U Operation Manual

Recording with the Self-timer 3
The self-timer function allows you to record
images after a time-lag of 10 seconds. This is
convenient when you want to record an image
of you and your friends together.
In CARD-CAMERA mode, press the
MENU/DISPLAY button until the menu
screen appears.
CARD
MENU/
DISPLAY
2
Select a, then press _,_ on the
Operation button. Select "SELF TIMER"
(_), then press _ (_2_).
CARD
Frame the
subject,
and then press the
STILL button to set the timer.
• The self-timer operating indicator flashes
while the timer counts down.
• The shutter will be automatically released
10 seconds after, and a still image of the
subject is recorded.
Self-timer operating indicator
i
AUTO
_)NORMAL
CANCEL
[STILL]
I{CARD
10/90
Notes:
• When recording with the self-timer, stabilize the
camcorder in the horizontal plane by attaching it
to a tripod, etc.
• To cancel the self-timer, press the STILL button
again in step 3 above.
• Self-timer mode will be canceled after recording
one image. Repeat steps 1 to 3 to record
another image with the self-timer.
Caution:
• Do not turn the power off or remove the
SmartMedia card once the self-timer operating
indicator begins flashing.
AUTO _CARD
[_)NORMAL
CANCEL
[V BUTTON]
10190
76