Table of Contents
Advertisement
Recording from an External
Source
You can use this camcorder
to record or edit
videos from another source, such as a VCR, TV,
or video disc player.
Connect the camcorder
to the source equip-
ment with the supplied
audio/video cable, as
shown.
Recording
Yellow: To VIDEO jack
White: To AUDIO
L jack
Red: To AUDIO
R jack
--
S-video
cable
(commercially
available)
--
Audio/video
cable
(supplied)
ii.......................................
_, _Yellow:
To video output jack
To S-video
outputi
_
White: To audio
output
(L)jack
socket_
(__ _
Red: To audio
output
(R)jack
Playback
TV with monitor output
VCR
Video disc
player
Notes:
• If the source
equipment
has only one audio
output jack,
use the white plug for the audio
connection
on the source
equipment.
(The input
audio
will only be recorded
on the left channel
of
the tape.)
• If the source
equipment
has an S-video
input
socket,
you can use a commercially
available
S-
video cable
for the video connection.
(The yellow
video
plug does not need to be connected
to the
VCR.)
To Record
from an External
Source
1
Set the camcorder to TAPE-VCR mode.
2
3
4
Begin playback
on the source equipment
connected
to the camcorder.
• Check the camcorder
screen to see if
the picture is being properly received.
Press the REC START/STOP
button on
the camcorder.
• The camcorder
enters the Recording
Standby mode.
Press _-/ ii on the Operation button to
begin recording.
Notes:
• To pause
recording,
press
_ / ii. Press _ / ii
again
to resume
recording.
• To operate
by remote
control,
perform
steps
1
and 2 above,
and press the TAPE REC START/
STOP button,
then press the PAUSE/STILL
button
(11).
• If "NO SIGNAL"
is displayed
on the camcorder
screen,
check
that the S-video
cable or audio/
video
cable
is properly
connected.
To stop recording
Press • on the Operation button.
66
Hide quick links:
Advertisement
Table of Contents
