Demonstration Mode - Sharp Viewcam VL-WD450U Operation Manual

Appendix
Demonstration Mode 4
You can watch a brief demonstration of the
special camcorder features in Demo mode.
If the demonstration appears on the screen
when you turn on the camcorder for the first
time, cancel the Demo mode to use your
camcorder.
SUPER CAT'S EYE switch
I MENU/DISPLAY button
_ Power switch
Operation button
6
Note:
• The demonstration is only displayed in English.
Watching the Demonstration
1
Remove the Mini DV cassette from the
camcorder (see page 12), and set the
SUPER CAT'S EYE switch to OFF.
2 Hold down the Lock button
and set the Power switch to
CAMERA.
Lock button
Select I_TC, t hen press _,_ on the
Operation button. Select"DEMO MODE"
(_), then press _ (_).
O
Press • or _- / i! to select"ON", then
press _.
Set the Power switch to OFF, then hold
down the Lock button and set the Power
switch to CAMERA.
• The demonstration begins.
Canceling Demo Mode
1
During the demonstration, press _E.Uv
DISPLAY
the MENU/DISPLAY button to (_/
pause the demonstration.
2
Select I_TC, t hen press _,_ on the
Operation button. Select "DEMO
MODE", then press _,_.
3
Press the MENU/DISPLAY button until
the menu screen appears.
O
MENU/
3
Press • or _-/!! to select"OFF", then
press _.
4
Press the MENU/DISPLAY button to
turn off the menu screen.
Note:
• The demonstration will pause if you press the
MENU/DISPLAY button. If you leave it for 60
seconds, or turn the power off temporarily and
then set the Power switch to CAMERA, the
demonstration will begin again.
93