Cisco SPA 525G2 User Manual page 33

Initiating pairing from Your Bluetooth-enabled mobile
Note: The procedure varies depending on your phone model. You must turn Bluetooth on, and you may
need to configure a separate setting to make your mobile phone discoverable by other devices.
The following example uses an Apple iPhone. Before starting, it's helpful to find the MAC address
of your Cisco SPA 525G2 IP phone. From your IP phone, go to the 'Setup' menu and select 'Status'.
Select 'Product Information'. The MAC address is displayed.
1. On your iPhone, click 'Settings'.
2. Under 'General', choose 'Bluetooth'. Ensure Bluetooth is turned on.
3. In the Bluetooth Window, under Devices, find the MAC address on the back of your Cisco SPA
525G2 IP phone.
4. Select the MAC address of the Cisco SPA 525G2.
5. Enter the PIN (the default is 0000) and press Connect.
Version 1.5 33 of 47