Configuring The Lcm - Cisco GS7000 Installation And Operation Manual

Chapter 3 Configuration
Menu Item Configuration Parameter
9
9
9

Configuring the LCM

The LCM can be configured using two different methods, as follows:
Using the Auto-Setup button
Using a handheld programming terminal
22
Copy Parameters
From Product
Setting 1
Setting 2
Setting 3
Setting 4
Setting 4
Setting 6
Setting 7
Setting 8
Setting 9
Copy Parameters
To Product
Setting 1
Setting 2
Setting 3
Setting 4
Setting 4
Setting 6
Setting 7
Setting 8
Setting 9
Copy Parameters
Restore Default
Description/Values
Description: Read/Write configuration
parameter. Store up to nine node configuration
settings for copying to a LCM in another node.
Values: Used, Empty
Description: Read/Write configuration
parameter. Copy up to nine node configuration
settings to a LCM in another node.
Values: Abort, Restore
Description: Allows the restoration of the
default settings, which is for a fully populated
node with two AC lines, two power supplies,
four receivers, and four transmitters installed.
Values: Abort, Restore
4022871 Rev C