SECTION 6: MAINTENANCE
Always disconnect power
to the machine before
performing maintenance.
Failure to do this may
result in serious person-
al injury.
Schedule
Note: This maintenance schedule is based on
average daily usage. Adjust the maintenance
schedule to match your usage to keep your lathe
running smoothly and to protect your investment.
Daily Check:
Every 6–8 Hours of Operation:
Cleaning &
Protecting
Page 43
ACCESSORIES
Lubrication
Pages 48–49
NOTICE
When lubricating the ball oilers inside the
change gear cover, DO NOT allow any lubri-
cant to contact the belts or pulleys. If lubri-
cant does get on these parts, thoroughly
clean the pulleys and replace the belts with
new ones before continuing operations.
Figure 80