Grizzly G4000 Owner's Manual page 55

3.
4.
Compound Slide
Backlash
Note: When adjusting backlash, keep in mind the
goal is to remove excess backlash without bind-
ing the movement of the slide. Overtightening will
cause excessive wear to the cross slide leadscrew
and nut.
Tools Needed
To adjust the cross slide backlash:
1.
2.
Figure 88
Figure 88.
Adjusting Half-Nut
Tools Needed
Qty
Figure 89.
To adjust the half-nut guide bar:
1.
2.
3.
Figure 89
4.
5. Steps 3–4
Qty