120 RPM
(BC1)
600 RPM
(BC3)
Figure 46.
Feed Rate Lever
Figure 47.
Figure 47
300 RPM
(BC2)
1000 RPM
(AC2)
NOTICE
Attempting to move the feed rate lever when
the spindle is rotating will damage the inter-
nal gears of the power feed mechanism and
will void the warranty. NEVER attempt to
move the feed rate lever when the lathe is
running.
To set the feed rate lever:
1.
400 RPM
(AC1)
2000 RPM
(AC3)
OFF