Tool Holders - Grizzly G4000 Owner's Manual

Compound Slide
Handwheel Dial Increments
Tools Needed
To set the compound slide angle:
1.
Figure 38.
2.
Distance
Qty
Figure 38

Tool Holders

4-Way Tool Post
Tools Needed
To use the 4-way tool post:
1.
NOTICE
To properly secure the tool against the
forces of cutting, the tool must be firmly
secured with at least two post cap screws.
Figure 39.
2. Step 1
3.
Note: The 4-way tool post is aligned in four
rotational positions by an indexing pin mount-
ed in the compound slide that engages slots
underneath the tool post base.
Qty
Figure 39