Grizzly G4000 Owner's Manual page 17

Mounting
Follow these guidelines when mounting your
lathe to ensure safe and accurate cutting
results:
Note: Re-check the bedway after 24 hours,
after two weeks, then annually to make sure
it remains level.
Unexpected movement of the lathe during
operation could draw the operator's hands or
body into the moving parts of the machine.
Make sure this machine is properly secured
to a stable workbench or stand before con-
necting it to power.
Figure 7
Lathe
Chip Pan
Workbench
Figure 7.
Lathe
Chip Pan
Workbench
Figure 8.
Figure 8