Rf Constellation Page; Controls - Cisco GS7000 Installation And Operation Manual

RF Constellation Page

Select the RF tab to access the RF Constellation page. The RF Constellation page
appears as shown in the following example.
The QAM constellation map is useful in diagnosing line problems that might
otherwise go undiagnosed. This section provides useful information on how to
interpret the information presented in the QAM map.
The interface consists of a panel of variables and the constellation map itself. At the
device level, the QAM functionality is only supported by Cheetah Technologies
products that are based on the ECMM technology.

Controls

Run — Start the sampling of data by pushing the Run button. The unit will

acquire 100 samples and then stop.
Stop — Use the Stop button to end the sampling.

4037424 Rev A

RF Constellation Page

63