Controlling The Ping Test; Test Results - Cisco GS7000 Installation And Operation Manual

Input Parameters
Timeout

Controlling the Ping Test

The Ping Test is controlled by the following buttons.
Button
Start Test
Abort Test

Test Results

Test Results
Below the test control buttons is a text area that displays the results of the ping test.
Any issues with the parameters will be displayed at the top of the results box.
During a test, the web page will automatically refresh to show the current results.
This refresh stops once the test is completed.
The results area permits the user to select results and copy them for pasting into
another program. This is accessed using one of the standard web browser methods:
Left-click the box and press Ctrl-A (select all)

Right-click the box and click Select all

Use the mouse cursor to select those lines of interest

4037424 Rev A
Description
Range 1 to 60 seconds. Standard value is 5 seconds.
Description
Starts the ping test. Each of the values provided in the input
fields is evaluated for validity.

If the host name field is blank, the test will not proceed.
(The exception is leaving it blank when a previous name
had been entered. In that case, that name will be used.)

Range checking on the parameters. Any parameter out
of range will be ignored, and the default value used.
Any issues with the parameters will be displayed at the top
of the results box. When the test is started, the web page will
begin to automatically refresh. Also, a message will be
displayed:
Ping in use from <source>; pkings xxx; size yyy; timeout
zzz seconds
indicating the parameters actually in use. This message is
also in the text box.
Stops any ping test currently in progress.
Clears the results window.
HSIA Diagnostics Page: Ping Command
57