Cable Modem Configuration File; Sample Configuration File - Cisco GS7000 Installation And Operation Manual

Chapter 2 Installation

Cable Modem Configuration File

Confirm that the cable modem configuration file has been successfully modified and
tested prior to deploying transponders into the system in quantity.
The transponder manages SNMP filters and trap destinations via the
docsDevNmAccessTable. To ensure proper management of SNMP access, such as
limiting access to certain SNMP managers or allowing the transponder to send
SNMP/HMS traps, the docsDevNmAccessTable must be populated via the cable
modem configuration file.
Additional object identifiers (OIDs) may be added to further configure other options
such as the transponder HTTP port, its username and password configuration
information, and support for Telnet server access. See Using the Craft Port (on page
35) and Using the Web Interface (on page 43) for details.

Sample Configuration File

The following is a sample cable modem configuration file. Include only those OIDs
that will provide the desired features and functionality.
Note: The configuration file entries shown above starting with "docsDevNmAccess"
all end with ".1." The ".1" is a row index indicating row 1 in the docsDevNmAccess
table. Additional rows can be added to this table by adding additional sets of
docsDevNmAccess entries with different row indexes. A given row index may be
used only once.
12 4037424 Rev A