Hsia Diagnostics Page: Ping Command; Input Parameters - Cisco GS7000 Installation And Operation Manual

Chapter 5 Using the Web Interface

HSIA Diagnostics Page: Ping Command

Select the HSIA tab to view high speed Internet access diagnostics. The HSIA
Diagnostics page appears as shown in the following example.
The HSIA-Ping Web Interface is accessed from the Connection form that is first
displayed when the transponder is accessed.

Input Parameters

Input Parameters
Target IP address or name Either a standard IPv4 dotted-quad address or a host name
Ping from what source
Number of Pings
Ping size
56
Description
is entered. The address entered will be unconditionally
given to the DNS resolver; a dotted-quad will be resolved
the same value, and a name will be resolved to its IPv4
address. The final IPv4 address to be pinged is shown in
parenthesis beside the host field.
There are up to three choices, depending on what is
available in the unit:

Cable Modem: always available

CPE: available if the CPE stack is activated

EMTA: available if the VoIP stack is licensed and
activated
Range is 1 to 100.
Range is 64 to 1518. 64 is the standard size.
4037424 Rev A