Gs7000 Optical Hub Installation - Cisco GS7000 Installation And Operation Manual
Docsis status monitor transponder
Hide thumbs
Also See for GS7000:
- Installation and operation manual (254 pages) ,
- Installation and configuration manual (162 pages) ,
- Maintenance manual (15 pages)
Table of Contents
Advertisement
Chapter 2 Installation
GS7000 Optical Hub Installation
Complete the following steps to install the transponder in the GS7000 Optical Hub.
1
Remove the transponder from the shipping package.
2
Ensure that the correct pad for the desired application is installed in the pad
socket. For GS7000 Optical Hub applications, verify the use of the 10 dB pad in
the transponder pad socket, as shown below.
3
If any other size pad is in place (a 0 dB pad, for example), replace it with the 10
dB pad as shown.
18
4037424 Rev A
Advertisement
Table of Contents
