Cisco SCE 2000 Installation And Configuration Manual page 49

Chapter 4 Installation and Maintenance
Figure 4-4
Figure 4-5
The SCE 2000 mounts to the two front rack posts with brackets that attach to the front of the SCE 2000
The inside width between the two posts or mounting strips (left and right) must be at least 17.3 inches
(44 cm).
Remember to leave a two-inch (5 cm) clearance on both sides of the SCE 2000 and at the rear for
Note
adequate airflow for the inlet and exhaust vents.
Because the inlet and exhaust ports (vents) for cooling air are located at both sides of the chassis,
respectively, multiple SCE 2000s can be stacked in a rack with no vertical clearance.
How to Attach the Brackets to the SCE 2000, page 4-8
•
How to Attach the Crossrail Supports to the Rack, page 4-9
•
How to Mount the System to the Rack, page 4-10
•
OL-7824-07
Mounting Brackets for 2-post Rack
Mounting Brackets for 4-post Rack
Cisco SCE 2000 4xGBE Installation and Configuration Guide
Installing the SCE 2000 Platform
4-7