Front Controls; Rear Controls - Grizzly G0636X Owner's Manual

Front Controls

A. Blade Tension Scale: Allows for easy moni-
toring of blade tension.
B. Blade Tension Handwheel: Tensions blade
in gradual increments.
C. Blade Tracking Window: Allows for easy
monitoring of blade tracking (refer to Page
18).
D. Fence, Rail, and Miter Gauge: Allows for
controlled cutting at various angles.
E. Foot Brake (G0636X): Cuts power to motor
and allows bandsaw blade to be quickly
brought to a stop.
A
B
Figure 40. Front controls.
-32-

Rear Controls

F. Guide Post Handwheel and Lock Knob:
Moves blade guide support quickly to the
desired height on the guide post; locks set-
ting (refer to Page 36).
G. Quick Release Blade Tension Lever:
Releases blade tension for quick blade
changes.
H. Blade Tracking Knob and Lock Lever:
Moves and locks blade tracking.
I. Table Tilt Lock Lever: Locks or unlocks the
table at the current angle.
J. Table Tilt Handwheel: Tilts the table up to
5º to the left or 45º to the right (refer to Page
35).
C
D
E
G0636XB Motor Brake
The Model G0636XB has a motor brake that acti-
vates and quickly stops the blade when the OFF
button is pressed.
Model G0636X/G0636XB (Mfd. Since 04/17)
F
G
I
Figure 41. Rear controls.
H
J