Uninstalling The Current Driver And Client Utilities; Client Utility Procedures; Opening A Client Utility; Exiting A Client Utility - Cisco AIR-PCM341 Installation And Configuration Manual

Client Utility Procedures

Uninstalling the Current Driver and Client Utilities

Cisco recommends that you uninstall the existing driver and client utilities for your client adapter before
upgrading to more recent versions. Follow the steps below to uninstall your client adapter's current
driver and client utilities.
Step 1 Eject the client adapter and remove it from the Windows CE device.
Step 2 Select Start > Settings > System tab > Remove Programs (on a PPC device) or Start > Settings >
Control Panel > Remove Programs (on an HPC or Windows CE .NET device).
Step 3 Select Cisco Wireless LAN Adapter.
Step 4 Tap the Remove button.
Step 5 When asked to verify your decision to remove the adapter, tap Yes.
Step 6 Tap OK. The driver, client utilities, registry entries, and Cisco directory are removed.
Go to the
Step 7
new driver and client utilities.

Client Utility Procedures

This section provides instructions for the following procedures:
•
•
•
•

Opening a Client Utility

To open ACU on your Windows CE device, double-tap the ACU icon or select Start > Programs >
Cisco > ACU. The Profiles screen appears.
To open WLM on your Windows CE device, double-tap the Wireless Login Module icon or select Start
> Programs > Cisco > Wireless Login Module. The Wireless Login Module screen appears.

Exiting a Client Utility

To exit ACU or WLM, tap OK.
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
8-8
"Installing the Driver and Client Utilities" section on page 3-2
Opening a client utility, page 8-8
Exiting a client utility, page 8-8
Finding the version of a client utility,
Deleting client utility icons on HPC and Windows CE .NET devices,
page 8-9
Chapter 8 Routine Procedures
for instructions on loading a
page 8-10
OL-1375-03