Obtaining A User Certificate - Cisco AIR-PCM341 Installation And Configuration Manual

Chapter 5 Configuring the Client Adapter
Step 2 Make sure Trusted Authorities appears in the Certificate drop-down menu.
Step 3 Tap the Import button.
Step 4 The Certificate Manager Open screen appears (see
Figure 5-5
Tap the CA certificate file.
Step 5
The Certificate Manager screen reappears with the name of the CA certificate server listed in the middle
Step 6
of the screen.
Tap OK to close the Certificate Manager.
Step 7

Obtaining a User Certificate

If you are planning to use EAP-TLS authentication on a PPC 2002 device, follow the steps below to
import the user certificate.
Note As an alternative to the procedure below, you can use the Certificate Manager to import a user certificate.
To do so, follow the steps in the
Certificates (not Trusted Authorities) appears in the Certificate drop-down menu in
user certificate file (not the CA certificate file) in
Make sure that your Windows CE device has an ActiveSync link to a laptop or PC that is on the same
Step 1
network as the certificate server you want to use.
Select Start > Programs > Cisco > Enroll. The Certificate Enrollment screen appears (see
Step 2
OL-1375-03
Certificate Manager Open Screen
"Obtaining a CA Certificate"
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
Figure 5-5).
section above, but make sure My
Step 5.
Using Host-Based EAP
Step 2 and tap the
Figure 5-6).
5-19