Cisco AIR-PCM341 Installation And Configuration Manual page 111

Appendix A Technical Specifications
Table A-1
Radio Specifications
Type
Power output
Note
Note
350 series
340 series PC card
340 series LM card
Operating frequency
Usable channels
Interference rejection
Data rates
Modulation
Receiver sensitivity
350 series
340 series
Receiver delay spread
(multipath)
OL-1375-03
Technical Specifications for the 340 and 350 Series Client Adapters (continued)
Direct-sequence spread spectrum (DSSS)
IEEE 802.11b compliant
Refer to Appendix D for limitations on radiated power (EIRP) levels in
the European community and other countries.
If you are using an older version of a 340 or 350 series client adapter,
your power level options may be different than those listed here.
100 mW (20 dBm)
50 mW (17 dBm)
30 mW (15 dBm)
20 mW (13 dBm)
5 mW (7 dBm)
1 mW (0 dBm)
30 mW (15 dBm)
1 mW (0 dBm)
30 mW (15 dBm)
15 mW (12 dBm)
5 mW (7 dBm)
1 mW (0 dBm)
2.400 to 2.497 GHz (depending on the regulatory
domain in which the client adapter is used)
2412 to 2484 MHz in 5-MHz increments
–35 dB adjacent channel rejection
1, 2, 5.5, and 11 Mbps
Binary phase shift keying (BPSK) - 1 Mbps
Quaternary phase shift keying (QPSK) - 2 Mbps
Complementary code keying (CCK) - 5.5 and
11 Mbps
–94 dBm @ 1 Mbps
–91 dBm @ 2 Mbps
–89 dBm @ 5.5 Mbps
–85 dBm @ 11 Mbps
–90 dBm @ 1 Mbps
–88 dBm @ 2 Mbps
–87 dBm @ 5.5 Mbps
–83 dBm @ 11 Mbps
500 ns @ 1 Mbps
400 ns @ 2 Mbps
300 ns @ 5.5 Mbps
140 ns @ 11 Mbps (350 series)
70 ns @ 11 Mbps (340 series)
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
A-3