Cisco AIR-PCM341 Installation And Configuration Manual page 50

Configuring Your Client Adapter
Table 5-1
Parameter
WEP
Network Security Type
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
5-8
Client Adapter Configuration Parameters (continued)
Description
Specifies the type of wired equivalent privacy (WEP) that your client
adapter will use.
Options: No WEP, Static WEP Keys, or Dynamic WEP Keys
Default: No WEP
WEP
No WEP
Static WEP Keys
Dynamic WEP Keys
Specifies the type of 802.1X authentication that your client adapter will
use.
Options: None, LEAP, or Host Based EAP
Default: None
Network Security Type
None
LEAP
Host Based EAP
Chapter 5 Configuring the Client Adapter
Description
Disables WEP for your client adapter.
Enables static WEP for your client adapter
after you enter a valid WEP key.
Go to Step 3 for instructions on
Note
entering a static WEP key and
enabling WEP.
Enables WEP keys to be derived
automatically during EAP authentication.
If you set the Network Security Type to
LEAP, Dynamic WEP Keys is set
automatically. If you set the Network
Security Type to Host Based EAP, you
must set the WEP parameter to Dynamic
WEP Keys.
Note Go to Step 3 for instructions on
setting dynamic WEP keys.
Description
Disables 802.1X authentication for your
client adapter.
Enables LEAP authentication for your
client adapter.
Go to Step 3 for instructions on
Note
using LEAP.
Enables your client adapter to use any
802.1X authentication type for which your
operating system has support (such as
EAP-TLS or PEAP).
Go to Step 3 for instructions on
Note
enabling and using host-based
EAP.
OL-1375-03