Cisco AIR-PCM341 Installation And Configuration Manual page 104

Error Messages
Error Message No CE services are currently running on this computer. Please run
ActiveSync and make sure you are connected to a supported device. NOTE: This
Install is for 3.0 CE devices and greater.
Explanation
connection established between your laptop or PC and your Windows CE device.
Recommended Action
on page 3-2
Error Message No profiles found. (Use ACU to create a profile.)
Explanation
Recommended Action
Windows CE device.
Error Message The object or property already exists.
Explanation
Recommended Action
Error Message The old password you supplied doesn't match what you entered
previously. Please try it again.
Explanation
match the password that was used previously.
Recommended Action
Error Message PEAP failed initialization. Please make sure that PEAP is installed
correctly and Trusted Root Certificate Authority certificate is installed
correctly.
Explanation
specified root certificate is missing from the system.
Recommended Action
installed correctly.
Error Message Please select one of the profiles.
Explanation
profile was selected.
Recommended Action
for the action you want to take.
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
9-8
An attempt was made to install the client adapter installation file without an ActiveSync
Follow the instructions in the
to establish an ActiveSync connection.
Profiles have not been created for your client adapter.
Create a profile in ACU for the client adapter to use. If necessary, reset the
An attempt was made to import a certificate file that was already installed.
Tap OK and select a different certificate to import.
The password entered in the Old Password field on the Change Password screen does not
Re-enter your old password in the Old Password field.
The PEAP authentication process failed during initialization, most likely because the
Make sure that PEAP and the Trusted Root Certificate Authority certificate are
The Edit, Rename, or Delete button on the ACU Profiles screen was tapped before a
Tap OK to acknowledge the message. Then select a profile and tap the button
Chapter 9
"Installing the Driver and Client Utilities" section
Troubleshooting
OL-1375-03