Cisco SCE 8000 Installation Manual page 41

Step 13 Click Finish.
The Configuration Output window opens (see
Figure 30 Usage Analysis Wizard—Configuration Output Window
New devices are added to the default site of the Site Manager tree in the Network Navigator (see
Figure 31 Network Navigator
The wizard attempts to connect to all the devices that you defined. The operation fails if:
The wizard cannot connect to any of the SCE devices that you listed in
–
You defined a Collection Manager in
–
If you defined a Collection Manager in
destination is the CM.
Figure 30).
Step 8, but the wizard cannot connect to it.
Step 8, the SCE devices are configured so that the only category 1 RDR
Figure
Step 4.
31).
41