SCA BB Real-Time Monitoring Configuration Utility (rtmcmd) and associated real-time monitoring report templates
–
SCA BB Signature Configuration Utility (sigconf)
–
Installing the Application on the Cisco SCE Platform
Use the Cisco SCE Software Upgrade wizard in the console to install the SCE Firmware (PKG) Installation, application file (PQI)
and the protocol pack (SPQI) on selected Cisco SCE platforms.
Before You Start
Before you begin the Cisco SCE platform upgrade, ensure that you perform the following tasks:
• If the IP addresses of the Cisco SCE platforms to be upgraded are not defined in the Network Navigator, gather the IP
addresses of all SCE platforms to be upgraded.
• Download the relevant PQI file and protocol pack to a local location or to a location accessible by FTP. If using an FTP
site, make sure you have the complete FTP location and path for each file.
How to Install Files on the Cisco SCE Platform
Step 1
In the Network Navigator of the console, select the Cisco SCE platforms to be upgraded. Right-click the corresponding
Cisco SCE platform name and choose SCE Software Upgrade Wizard (see
If the Cisco SCE platforms are not yet defined in the Network Navigator, you can select the site node.
Figure 11
Network Navigator
20
Figure
11).