Installing The Cisco Sca Bb Application; How To Verify That The Cisco Sce Platform Is Running A Compatible Version Of The Os - Cisco SCE 8000 Installation Manual

For details, see the "Configuring the Collection Manager" section of the Cisco Service Control Management Suite
Collection Manager User Guide.
Step 12 Set the Collection Manager time zone by using the jselect-sce-tz.sh script. For example, if the Cisco SCE device is located
in GMT+2, run this command as the scmscm user:
$ ~scmscm/cm/bin/jselect-sce-tz.sh --offset=120
Step 13 Activate the periodic delete procedures for the database tables by running the create_periodic_del_procs.sh script as the
scmscm user:
~scmscm/db_maint/create_periodic_del_procs.sh
For details, see the "Managing the Periodic Deletion of Old Records" section of the Cisco Service Control Management
Suite Collection Manager User Guide.
Step 14 Activate the automatic invocation of the periodic delete procedures:
$~scmscm/scripts/dbperiodic.sh --load
This loads the default data retention settings defined in ~scmscm/db_maint/dbperiodic.conf.
Step 15 Start the Collection Manager by running this command:
~scmscm/cm/bin/cm start
Step 16 Add a user for PRPC authentication. It is necessary to add a user for PRPC authentication because Cisco SCA BB
requires a username and password when connecting to the CM.
To add a user for PRPC authentication, use the p3rpc command-line utility:
~scmscm/cm/bin/p3rpc --set-user --username=scmscm --password=scmscm-password

Installing the Cisco SCA BB Application

This section describes how to install the Cisco SCA BB application.
For more information, see the Cisco Service Control Application for Broadband User Guide.
SUMMARY STEPS
Ensure that both the Cisco SCE platforms and the Subscriber Manager operate and run on versions that are compatible
Step 1
with your Cisco SCA BB version.
Step 2 Install the Cisco SCA BB Console.
(Optional) Install the Cisco SCA BB utilities:
Step 3
• Service Configuration Utility (servconf)
• SCA BB Signature Configuration Utility (sigconf)
• SCA BB Real-Time Monitoring Configuration Utility (rtmcmd) (together with associated real-time monitoring
report templates).
Install the Cisco SCA BB application component that resides on the Cisco SCE platform. This installation can be carried
Step 4
out from the Cisco SCA BB Console at a later stage in the overall installation process. See the
the Cisco SCE Platform" section on page

How to Verify that the Cisco SCE Platform is Running a Compatible Version of the OS

From the Cisco SCE platform CLI prompt
Step 1
Press Enter.
Step 2
18
20.
type
(SCE#), show version
"How to Install Files on
.