Initial Cisco Sca Bb Configuration; How To Use The Usage Analysis Wizard To Define The Default Site - Cisco SCE 8000 Installation Manual

• RDR formatter destination—The Cisco SCE platform generates RDRs and sends them to the specified destinations (external
collection systems) via the RDR formatter. You can configure up to eight RDR formatter destinations. Specify the IP address
and port number for each destination.
Table 8 lists the commands both for displaying the currently configured values and for configuring these parameters. It also lists
the command mode for each configuration command. All the show commands are executed in the user EXEC command mode.
Table 8 Initial Setup Configuration
Parameter
Management IP address
and subnet mask
Default gateway
Hostname
Authorization-level
passwords
Clock
Time zone
Domain name server
RDR formatter
destination

Initial Cisco SCA BB Configuration

Initial SCA BB configuration includes two main aspects:
• Defining your site—Defining all your Cisco Service Control components. Use the Usage Analysis wizard to define your site.
• Defining a basic service configuration.
Usage Analysis Wizard
Use this wizard to perform these tasks:
• Create the site.
• Create a service configuration called Usage Analysis with the following characteristics:
The mode is set to Report Only.
–
The maximum Transaction RDR rate is set as the default value (250) divided by the number of Cisco SCE devices.
–

How to Use the Usage Analysis Wizard to Define the Default Site

The Usage Analysis wizard allows you to create a simple model of devices and connect to them.
If they do not exist, the devices defined in the wizard are added to the default site in the Site Manager tree.
Note
32
show Command
show interface GigabitEthernet
1/1 ip address
show ip default-gateway
show hostname
—
show clock
show calendar
show timezone
show hosts
show rdr-formatter destination
Configuration Command
ip address x.x.x.x subnet-mask
ip default-gateway x.x.x.x
hostname host-name
enable password level level
[encryption-type] password
calendar set hh:mm:ss day month
year
clock read-calendar
or
clock set hh:mm:ss day month year
clock update-calendar
clock timezone zone-name
offset-hours
ip domain-lookup
ip domain-name domain-name
ip name-server server-address1
[server-address2] [server-address3]
rdr-formatter destination ip-address
port port-number
Configuration Command
Mode
GigabitEthernet
interface configuration
Global configuration
Global configuration
Global configuration
Privileged EXEC
Global configuration
Global configuration
Global configuration