Cisco SCE 1000 Quick Start Manual page 41

Examples
Example 1:
The following example shows the running configuration file.
SCE 1000number show running-config #This is a general configuration file (running-config).
#Created on 15:50:56 CET MON February 11 2006
#cli-type 1
#version 1
clock timezone CET 1
snmp-server community "public" ro
snmp-server host 10.1.1.253 traps version 1 "public"
interface LineCard 0
connection-mode active
no silent
no shutdown
flow-aging default-timeout UDP 60
interface FastEthernet 0/0
ip address 10.1.5.109 255.255.0.0
interface FastEthernet 0/1
interface FastEthernet 0/2
exit
line vty 0 4
no timeout
exit
SCE 1000#
SCE 1000#copy running-config startup-config
Writing general configuration file to temporary location...
Backing-up general configuration file...
Copy temporary file to final location...
SCE 1000number
For backup purposes, the old startup-config file is saved under the directory: tffs0:system/prevconf.
To remove a configuration command from the running-config, use the no form of the command.
Example 2:
The following example illustrates how to remove all DNS settings from the running configuration.
SCE 1000(config)#no ip name-server
SCE 1000(config)#
41