Cisco SCE 1000 Quick Start Manual page 15

Table 1 Setup Command Parameters (continued)
Parameter
root password
password encryption status
Time Settings
time zone name and offset
local time and date
SNTP Configuration
broadcast client status
unicast query interval
unicast server IP address
DNS Configuration
DNS lookup status
default domain name
IP address
TCP port number
Access Control Lists
Access Control List number
list entries (maximum 20 per list)
IP access ACL
telnet ACL
SNMP agent status
GET community names
SET community names
trap managers (maximum 20)
Authentication Failure trap status
enterprise traps status
system administrator
Topology Configuration
connection mode
Definition
Root level password.
Character string from 4-100 characters beginning with an alpha
character.
Enable or disable password encryption?
Standard time zone abbreviation and minutes offset from UTC.
Current local time and date. Use the format:
00:00:00 1 January 2002
Set the status of the SNTP broadcast client.
If enabled, the SCE will synchronize its local time with updates received
from SNTP broadcast servers.
Interval in seconds between unicast requests for update (64 – 1024)
IP address of the SNTP unicast server.
Enable or disable IP DNS-based hostname translation.
Default domain name to be used for completing unqualified host names
IP address of domain name server. (maximum of 3 servers)
TCP port number of the RDR-formatter destination
How many ACLs will be necessary? What IP addresses will be
permitted/denied access for each management interface? You may want
ACLs for the following:
Any IP access
Telnet access
SNMP GET access
SNMP SET access
IP address, and whether permitted or denied access.
ID number of the ACL controlling IP access.
ID number of the ACL controlling telnet access.
Enable or disable SNMP management.
Community strings to allow GET access and associated ACLs
(maximum 20).
Community strings to allow SET access and associated ACLs
(maximum 20).
Trap manager IP address, community string, and SNMP version.
Sets the status of the Authentication Failure traps.
Sets the status of the enterprise traps.
Name of the system administrator.
Is the SCE 1000 installed using inline topology or receive-only topology
using an optical splitter?
15